Communicators

HWF2A-COM / HWF2V-COM LTE Fire Communicators

Honeywell’s HWF2-COM Series LTE / IP fire communicators are single or dual path commercial fire alarm communicators that offer contact ID reporting with any fire alarm control panel (FACP) with a built in dialer. These easy to install communicators offer three selectable reporting paths which include LTE Cellular only, IP only, or IP primary/LTE cellular backup.

HWF2A-COM / HWF2V-COM LTE Fire Communicators Features and Benefits

  • AT&T (HWF2A-COM) and Verizon Wireless (HWF2V-COM) models available
  • Dual path communications to central station using Internet or LTE cellular technology
  • Requires no change to the existing Fire Alarm Control Panel configuration with connection to primary and secondary telephone ports
  • Works on Ethernet 10/100 ports
  • Base network connection (LAN or WAN), DSL or cable modem
  • Eliminates the cost of two dedicated phone lines
  • Data transmits over standard contact-ID protocol but is secured with the industry’s advanced encryption standard (AES 256 bit)
  • Includes primary power and battery supervision
  • Built-In Power Supply module: On board charging circuit design accommodates back-up battery
  • Diagnostic LEDs: Signal strength and status indicators to simplify troubleshooting
  • UL864 10th Edition listed

5128/5129

The 5128/5129 digital fire alarm communicators provide four fully supervised channel inputs to monitor UL listed fire alarm control panels. The 5128 comes in a vinyl and acrylic enclosure for mounting in the fire alarm control panel. The 5129 comes in a metal cabinet for surface mounting near the fire alarm control panel.

5128/5129 Features and Benefits

  • UL listed as a fire communicator for connection to UL listed 24 VDC local fire alarm control panels
  • Four fully supervised input channels programmable as voltage input active high or low or as a contact closure input
  • Dual phone line interface and line fault monitors
  • Reports in most major formats
  • Easy to install and service

5104

The 5104 is a six-zone fire alarm communicator providing digital fire reporting over ordinary telephone lines. The 5104 can be used to monitor existing local UL listed fire alarm control panels or as a standalone unit for sprinkler supervisory.

5104 Features and Benefits

  • UL listed as a fire communicator for connection to UL listed 24 VDC local fire alarm control panels or as a stand alone sprinkler supervisory control panel
  • Six fully supervised inputs:  One Class A and five Class B
  • Dual phone line interface and line fault monitors
  • Reports in most major formats
  • Fuseless overload protection with automatic reset circuitry and fault indicators – eliminates the cause of most field calls

SK-IP-2 and SK-IP-2UD

The SK-IP-2 and SK-IP-2UD are IP communicators UL 864 listed for signaling under Other Transmission Technologies and comply with NFPA 72 requirements. These IP communicators come with a metal enclosure to mount next to a UL listed fire alarm control panel. The SK-IP-2 has two supervised inputs and two additional outputs. The SK-IP-2UD adds a modem daughter board that supports upload/download over the internet or a customer’s intranet for IntelliKnight models 5820XL and 5808 fire alarm control panels.

SK-IP-2 and SK-IP-2UD Features and Benefits

  • Eliminates the cost of two dedicated phone lines
  • Requires no change to the existing fire alarm panel configuration
  • Fast alarm transmission – less than 10 seconds
  • Data transmits over standard Contact ID protocol but is secured with the industry’s highest level of encryption
  • Supports both dynamic (DHCP) or public and private static IP addressing

VISORALARM PLUS

visor

The VisorAlarm Plus receiver is Teldat’s solution to manage and receive alarms from fire alarm control panels equipped with Silent Knight’s SK-IP-2 and SK-IP-2UD IP alarm transmission modules. Each VisorAlarm Plus receiver supports up to 3,000 alarm panels.

VisorAlarm Plus Features and Benefits

  • Simultaneous management for up to 3,000 SK-IP-2 and SK-IP-2UD remote devices
  • Monitors connectivity status with all registered devices
  • Uses 512 bit AES encryption algorithm for all communications with installed IP modules
  • Communicates alarms to the automation server via a serial connection using Contact ID format and emulating Sur-Gard, Radionics or Ademco receiver protocols
  • Saves all configuration information on an external smart card that can be used for immediate system replacement under crash recovery situations.